See it live
Float levels, pump runtime, motor current, and cellular signal — updated continuously and logged every cycle. Nothing happens at the station you can't pull up later.
SCADA control for pump stations
Eyes on every pump station.
ARX controllers run your lift stations and septic systems — watching the floats, cycling the pumps, and calling you the moment something trips. So you find out from your phone, not from a 2 a.m. drive to the site.
What it does
Four jobs, one box on the wall.
Every ARX panel watches the station, runs the pumps, raises the alarm, and reports back to the fleet — without anyone standing in front of it.
Run the station
Start, stop, and alternate pumps in simplex or duplex. Chemical dosing and timed cycles. Hand–Off–Auto from the panel or from anywhere.
Hear it first
High water, stuck contactor, float fault, lost signal — pushed the instant they trip. The alarm reaches you before the overflow does.
Manage them all
Every station on one dashboard. Push firmware and rotate credentials over the air — update a hundred sites without rolling a single truck.
Built for the field
Hardware that lives in the panel.
Industrial hardware, dependable connectivity, and security built in — designed to run unattended at remote sites.
01Controller
An industrial controller that mounts on a DIN rail inside a standard control panel — built for continuous duty at the station.
02Connectivity
Reports in over wired Ethernet or cellular, so a station can stay in touch from remote or low-signal sites.
03Stays connected
Designed to keep reporting and recover on its own if a connection drops, so you're not left guessing about a site.
04Secure
Encrypted connections and controlled, verified updates help keep each station locked down.
05Event log
Keeps an on-board record of recent activity, so what happened at a site can be reviewed after the fact.
06Field setup
Can be set up and checked on site through a built-in local interface.
For contractors
Built to make your crew look good.
Win the bid, hand off a clean site, and support it without living in the truck. ARX puts eyes on every station you install — and the crew heading to it.
Guided diagnostics
Walk any tech through a fault, step by step. Built-in troubleshooting turns a 2 a.m. callout into a guided fix — your newest hand can clear it without waking your best one.
Whole-system health
Every station's level, runtime, signal, and controller health on one screen. See the entire operation at a glance instead of chasing it site by site.
Every station, one dashboard
Manage every controller you've installed from a single place. Check health and push updates across all your sites — without rolling a truck to each one.
Track trucks and crews
Pull your service vehicles onto the same map through a fleet API, so you can see the stations and the crews heading to them together — and send the closest one.
Control modes
One controller, every common layout.
The same firmware covers the station you have now and the one you build next.
SimplexDuplex · alternatingChemical dosingTimed doseLevel · transducerMulti-tankMonitor-only
Testimonials
What the field says.
Operators and contractors who run their stations on ARX — in their own words.
"ARX flagged Pump 2 pulling high amps days before it would've burned up. We swapped a seal on our own schedule instead of replacing a pump on an emergency call. It straight up saved that pump."
Plant superintendentMunicipal wastewater plant
"I used to worry about these stations all the time — every storm, every night, wondering if one overflowed while I was asleep. Now I glance at my phone and let it go. I actually sleep again."
Septic systems managerEnvironmental services
"We used to find out about a high-water alarm from a phone call we didn't want. Now it's on my phone before the wet well's anywhere near the top — I clear it from the couch."
Lift-station operatorMunicipal public works
Put eyes on your stations.
Tell us what you're running and we'll show you what ARX would see.